Chemical and Biological Engineering, Ph.D.

Print Degree Planner (opens a new window) |

Contact Information

Dr. Todd Menkhaus
Department of Chemical and Biological Engineering
(605) 394-2422 Dept: (605) 394-2421
E-mail: Todd.Menkhaus@sdsmt.edu
http://www.sdsmt.edu/CBE/

Faculty

Professors Dixon, Menkhaus (CBE Graduate Program Coordinator), Puszynski, Salem and Winter; Associate Professors Benjamin, Gilcrease, Sani, and Shende; Assistant Professors Brenza, Groven, and Hadley.

CBE Ph.D. Program Advisory Council

Professors Dixon, Menkhaus (Program Coordinator) and Winter; Associate Professor Benjamin, Gilcrease, Sani, and Shende; Assistant Professor Brenza, Groven, and Hadley.

Chemical and Biological Engineering

The Department of Chemical and Biological Engineering (CBE) offers, in addition to B.S. and M.S. degrees in chemical engineering, a Ph.D. degree in chemical and biological engineering. The Ph.D. program provides the chemical and biological engineering Ph.D. graduate a core educational experience in transport phenomena, chemical kinetics, biochemical engineering, chemical thermodynamics, and biotechnology. This knowledge base, along with key electives, provides graduate students the training to participate in biochemical and petrochemical processing, bio-based energy technologies, including biomass and biofuels; catalysis; bio-based and bio-compatible materials; biomedicine; bioremediation; emerging energy technologies; synthesis and functionalization of nanomaterials, and processing of polymers and composite materials. These areas are aligned with the expertise of our faculty members. The current research interest of the faculty can be found on the departmental website http://www.sdsmt.edu/CBE/. The modern Chemical and Biological Engineering and Chemistry (CBEC) building houses the CBE research laboratories.

The State of South Dakota is recognized as a leader and major producer of ethanol from starch in the United States. Hence the State of South Dakota is well positioned to play an important role in development of new bio-based technologies and value-added agricultural products. The Department of Chemical and Biological Engineering was instrumental in establishing the National Science Foundation Industry/University Cooperative Research Center (NSF I/UCRC) for BioEnergy Research and Development (CBeRD). This unique national center is focused on bio-based energy and chemical feedstocks, is comprised of four universities, including the SDSM&T, North Carolina State University, State University of New York - Stony Brook, University of Hawaii, and more than 20 industries and state and federal laboratories. Students participating in CBeRD I/UCRC Center research have worked on projects of current and immediate interest to the industrial sponsors.

The Ph.D. program is also a strong supporter of the State-focused research area in materials and advanced manufacturing, which include advanced materials, polymers, composites, and nanotechnology. The Composites and Polymer Engineering Laboratory (CAPE) is a key resource utilized by our students http://cape.sdsmt.edu/. The CBE research laboratories along with CAPE provide CBE Ph.D. students a wealth of modern resources to participate in cutting-edge research funded by the National Science Foundation, the Department of Energy, the Department of Defense, the Department of Agriculture, NASA, and industrial collaborators.

The Ph.D. Program in chemical and biological engineering is administered by a graduate Program Coordinator and Program Advisory Council consisting of appointed faculty members actively involved in the program. The Program Advisory Council is responsible for the curriculum and program policies.

Curriculum

The curriculum is designed to provide the CBE Ph.D. graduate with the depth and breadth of engineering knowledge to become a leader in their chosen focus area. To facilitate this, each student is asked to complete a program of study plan that will provide the framework for the student’s coursework and research. This should be filed with the Program Coordinator before the midterm of the second semester in residence. The CBE Ph.D. Advisory Council must approve all programs of study. Detailed information on examination policy, admission to candidacy, and defense of dissertation are included in the Chemical and Biological Engineering Ph.D. Program Handbook.

Students entering the program with B.S. or M.S. degrees from disciplines other than Chemical or Biochemical Engineering will be required to take several selected courses in Chemical Engineering at the undergraduate level, to provide a firm understanding of fundamental chemical engineering principles.

The Graduate Record Examination (GRE), three letters of recommendation, and a GPA of 3.00 or better are required of all applicants for the Ph.D. program. The TOEFL exam is required for students whose native language is not English.

All CBE Ph.D. candidates are required to successfully complete the required minimum credits and earn a grade of “C” or better, except for a final grade of “S” in CBE 898. However a 3.00 GPA must be maintained to receive graduate research assistantships (GRA).

Below is the summary of the basic required courses:

Category	Credits
Required courses¹ (minimum 6 credits from Chemical Engineering and 6 credits from Biological Engineering focus areas) selected from the two focus area lists	24
Required seminar	4
Minimum required research credits	32
Minimum electives^1,2	12
TOTAL	72

Curriculum Notes

¹ Students entering with a M.S. degree in Chemical Engineering or a closely related discipline may apply a maximum of twenty-four (24) course credit hours toward the required and elective course requirements subject to approval of the Chemical and Biological Engineering Ph.D. Program Advisory Council.

² Elective courses may be selected from the two focus area lists, from the example elective list, or from other SDSM&T courses as a part of a student‘s program of study, subject to approval of his/her major professor and graduate committee.

Focus Area — Chemical Engineering

Students pursuing a Ph.D. in Chemical and Biological Engineering must take the 500 and above level courses, not the 400 level courses.

CBE 444/544 Reactor Design Credits: (3-0) 3
OR
CBE 450/550 Systems Analysis Applied to Chemical Engineering Credits: 2 to 3
CBE 612 Transport Phenomena: Momentum Credits: (3-0) 3
CBE 613 Transport Phenomena: Heat Credits: (3-0) 3
CBE 616 Computations in Transport Phenomena Credits: (3-0) 3
CBE 621 Advanced Chemical Engineering Thermodynamics I Credits: (3-0) 3
CBE 714 Transport Phenomena: Mass Credits: (3-0) 3
CBE 728 Heterogeneous Kinetics Credits: (3-0) 3

Focus area — Biological Engineering

Students pursuing a Ph.D. in Chemical and Biological Engineering must take the 500 and above level courses, not the 400 level courses.

CBE 484/584 Fundamentals of Biochemical Engineering Credits: (3-0) 3
CBE 484L/584L Biochemical Engineering Laboratory Credits: (0-1) 1
CBE 603 Molecular Biology for Engineers Credits: (3-0) 3
CBE 735 Bioseparations Credits: (3-0) 3
CBE 741 Microbial and Enzymatic Processing Credits: (3-0) 3
CBE 792 Topics Credits: 1 to 4

Required courses (Seminar and Research)

Four (4) credits of CBE 890 Seminar and a minimum of thirty (30) credits of CBE 898D Dissertation are required.

CBE 890 Seminar Credits: (1-0) 1
CBE 898D Dissertation Credits: 1 to 12

Example elective courses

Students pursuing a Ph.D. in Chemical and Biological Engineering must take the 500 and above level courses, not the 400 level courses.

CBE 424/524 Molecular Modeling and Simulation Credits: (3-0) 3
CBE 445/545 Oxidation and Corrosion of Metals Credits: (3-0) 3
CBE 455/555 Pollution Phenomena and Process Design Credits: (3-0) 3
CBE 474/574 Polymer Technology Credits: 2 to 3
CBE 474L/574L Experimental Polymer Technology Credits: (0-1) 1
CBE 475/575 Advances in Processing and Nanoengineering of Polymers Credits: (2-0) 2
CBE 476/576 Organosilicon Polymer Chemistry and Technology Credits: (1-0) 1
CBE 485/585 Renewable and Sustainable Energy Credits: (3-0) 3
CBE 485L/585L Renewable and Sustainable Energy Lab Credits: (0-1) 1
CBE 488/588 Applied Design of Experiments for the Chemical Industry Credits: (2-0) 2
CBE 489/589 Composites Manufacturing Credits: (1-0) 1
CBE 791 Independent Study Credits: 1 to 4
CBE 792 Topics Credits: 1 to 4
CBE 890 Seminar Credits: (1-0) 1
CBE 894 Internship Credits: 1 to 6
CHEM 482/582 Environmental Chemistry Credits: (3-0) 3
MES 712 Interfacial Phenomena Credits: (3-0) 3
NANO 701 Nano Materials Credits: (3-0) 3
ENGM 631 Optimization Techniques Credits: (3-0) 3
ENGM 720 Statistical Process Control Credits: (3-0) 3